[rmixxx]

I have a set of clear headlights here, black styling-headlamps with a separate cornerlight(blinker\park)

The thing is that the cables going out from the lamp-assembly has seen better days (the previous owner decided to play doctor on them or something..and snipped off the original-connectors etc. etc.

My question is as follows. Does anyone have a decent picture of how the wireing-assemly is supposed to be? A pic of how they are supposed to be originally?

Enlighten me anyone?

[rmixxx]

To illustrate the problem, here are some horribly bad pictures :D

[rmixxx]

I have now soldered a bit on the wiering harness for the headlamps..What I did was as follows:
-Ground from blinkers, parking-lights and diode-assemly soldered into ONE lead.
-positive(+) from parking-lights + diode-assembly into ONE lead.
-positive(+) from blinker still going to a separate lead.

I originally wanted to solder the leads into the original contacts that was supposed to come with the lamps when I bought them, but seeing as I still don't have the original connectors. I'm thinking I might have to just crimp some regular cable-shoes onto the leads and plug them into the original connector in the car.
Only problem with that is that I don't know where to put the different leads... what hole in the original connector(the wireharness in the car) is ground, positive for park,positive blinkers etc.

[ÄRRet]

Please write in English or Swedish. Norweigan is hard to understand even though i´m Swedish...

[rmixxx]

Translated into english for the people that think Norwegian is a hard language to understand :shock:

[rmixxx]

Fixed the connectors now :) Ordered original Volvo connectors(that fit in the original net), tacks, wire\connector sealers. Put it all back together..Works perfectly and done in a way more professional way than cutting\splicing wires etc.

result:





Hva tycks? :D

[Nonameswayne]

Snyggt jobbat!