Sveriges Volvoforum

I have a set of clear headlights here, black styling-headlamps with a separate cornerlight(blinker\park)

The thing is that the cables going out from the lamp-assembly has seen better days (the previous owner decided to play doctor on them or something..and snipped off the original-connectors etc. etc.

My question is as follows. Does anyone have a decent picture of how the wireing-assemly is supposed to be? A pic of how they are supposed to be originally?

Enlighten me anyone?

To illustrate the problem, here are some horribly bad pictures :D

I have now soldered a bit on the wiering harness for the headlamps..What I did was as follows:
-Ground from blinkers, parking-lights and diode-assemly soldered into ONE lead.
-positive(+) from parking-lights + diode-assembly into ONE lead.
-positive(+) from blinker still going to a separate lead.

I originally wanted to solder the leads into the original contacts that was supposed to come with the lamps when I bought them, but seeing as I still don't have the original connectors. I'm thinking I might have to just crimp some regular cable-shoes onto the leads and plug them into the original connector in the car.
Only problem with that is that I don't know where to put the different leads... what hole in the original connector(the wireharness in the car) is ground, positive for park,positive blinkers etc.

Please write in English or Swedish. Norweigan is hard to understand even though i´m Swedish...

Translated into english for the people that think Norwegian is a hard language to understand :shock:

Fixed the connectors now :) Ordered original Volvo connectors(that fit in the original net), tacks, wire\connector sealers. Put it all back together..Works perfectly and done in a way more professional way than cutting\splicing wires etc.

result:





Hva tycks? :D

Snyggt jobbat!