- mån 08 apr 2019, 11:38
#1310047
Volvo V70 2005 som går som tåget fast frugan har den mest av tiden. Har funkat kanon. Iofs så slutade backsensorn att fungera för ett år sedan men inget man inte kunde vara utan.
Det har tänts någon lampa då och då men har sloclnat av sig själv efter ett tag så jan har inte gjort något ät det.
Men nu har jag fått jackpot och efter att jag kört Delphi har jag fått följande felkoder:
Confirmed and stored codes (Mode 03)
10 P0500 Vehicle Speed Sensor "A"
Pending codes in previous and current driving cycle (Mode 07)
10 P0500 Vehicle Speed Sensor "A"
Brake (ABS (BCM) - Mark 25) DTC Description
0109 - Communication, CAN bus - Permanent
0115 - Communication, CAN bus - Permanent
0100 - Communication, CAN bus - Permanent
0119 - Voltage supply yaw rate control sensor (AYC). Voltage too low - Permanent
0021 - Wheel sensor RF, faulty signal - Permanent
0114 - Communication active yaw rate control sensor (AYC). Signal missing - Permanent
Brake (Steering angle - Diagnose DSTC) DTC Description
0007 - Control unit - Permanent
000E - Control unit - Permanent
Instrument (Instrument - DIM (DIM (Driver Info. Module))) DTC Description
0001 - Mileage, wrong value - Intermittent
Delphi DS150E (New VCI) | 2015 Release 3 (2.15.3.0) 2
Immobiliser (Immobiliser - Diagnose (CEM)) DTC Description
4A31 - Fuel level sensor, incorrect signal - Permanent
4A35 - Fuel level sensor, incorrect signal - Permanent
1C06 - Control unit alternator, incorrect - Intermittent
Detta kom dagen efter att jag var inne och besiktade och fick en anmärkning på "Avgasrening-utrustning, Injustering och funktion, Avgasrening Vevhusventilation (8.2.1.1, inte sluten)."
Hittade en böjd stenhårt gummirör som var sprucken, kan det vara den som orsakat alla dessa felkoder?
Vart sjutton skall jag börja.
/Ole
Det har tänts någon lampa då och då men har sloclnat av sig själv efter ett tag så jan har inte gjort något ät det.
Men nu har jag fått jackpot och efter att jag kört Delphi har jag fått följande felkoder:
Confirmed and stored codes (Mode 03)
10 P0500 Vehicle Speed Sensor "A"
Pending codes in previous and current driving cycle (Mode 07)
10 P0500 Vehicle Speed Sensor "A"
Brake (ABS (BCM) - Mark 25) DTC Description
0109 - Communication, CAN bus - Permanent
0115 - Communication, CAN bus - Permanent
0100 - Communication, CAN bus - Permanent
0119 - Voltage supply yaw rate control sensor (AYC). Voltage too low - Permanent
0021 - Wheel sensor RF, faulty signal - Permanent
0114 - Communication active yaw rate control sensor (AYC). Signal missing - Permanent
Brake (Steering angle - Diagnose DSTC) DTC Description
0007 - Control unit - Permanent
000E - Control unit - Permanent
Instrument (Instrument - DIM (DIM (Driver Info. Module))) DTC Description
0001 - Mileage, wrong value - Intermittent
Delphi DS150E (New VCI) | 2015 Release 3 (2.15.3.0) 2
Immobiliser (Immobiliser - Diagnose (CEM)) DTC Description
4A31 - Fuel level sensor, incorrect signal - Permanent
4A35 - Fuel level sensor, incorrect signal - Permanent
1C06 - Control unit alternator, incorrect - Intermittent
Detta kom dagen efter att jag var inne och besiktade och fick en anmärkning på "Avgasrening-utrustning, Injustering och funktion, Avgasrening Vevhusventilation (8.2.1.1, inte sluten)."
Hittade en böjd stenhårt gummirör som var sprucken, kan det vara den som orsakat alla dessa felkoder?
Vart sjutton skall jag börja.
/Ole